If you don't see your other computer, you can manually enter your other computer's IP address by using the 'Connect to Server' command in the Remote menu. Tech Info: The Connect to LAN Server looks for other SuperSync computers via Bonjour. Note: You can initiate the connection from either computer since the SuperSync Server is running on both computers. From Computer # 1, in SuperSync's Remote menu, select the 'Connect to LAN Server' command and then select your Computer # 2.Īfter selecting your Computer #2, SuperSync on Computer #1 will connect to Computer #2's library.Repeat Steps 1-5 on Computer #2 (and any other computers if you have more than a 2 client SuperSync license).Ĭonnecting To A Computer Running SuperSync.Leave SuperSync running since we will be connecting to it later in this quick start. Once you verify that the SuperSync Server is running, the configuration on this computer is complete. ![]() If you still have issues starting the SuperSync Server, see the Server Help and the Network Trouble Shooting Guide. Note: If the SuperSync Server isn't running, confirm SuperSync's Preferences (Step 2). In the lower right-hand corner of the SuperSync Window, the server status should change from "Publishing to "Server Running " ![]() ![]() Verify that the SuperSync Server is running by looking at SuperSync's Status Bar.These checkboxes will allow your computer to be seen by other computers running SuperSync. Enable/Check the ' Enable SuperSync Server' and the ' Accept Music Uploads From Other Networked SuperSync(s)' checkboxes. Open SuperSync's Preferences ( ,) via SuperSync's FILE menu (Mac) or EDIT menu (Windows).If you see this screen, you can enter it now, or later in the next steps. Note: The first time you launch SuperSync, SuperSync will ask you if you want to enable the SuperSync Server and setup a password for server access. When the SuperSync starts, SuperSync will connect to your iTunes library and show it's content. Install and launch SuperSync on Computer #1.Typically your Local Library is configured to us iTunes and you then connect to various "remote" libraries such as iPods,iPhones, disk drives, and other networked SuperSync libraries. Note: All of the Quick Start guides below assume that you are using iTunes as your default local music library. Tip: Before attempting a complete synchronization, at least for the first time, you should synchronize only one or two files to make sure they're going where you expect them. Other configurations, such as syncing with a network drive are discussed later in this manual. If you are using a different configuration, please read this guide since the concepts in presented here will also help you understand the basics of SuperSync. Both computers will use SuperSync's to 'Get', 'Put', and 'Sync' files between the two iTunes libraries.Both libraries will be 'Sync'ed' so both computers have the same content.Both computers have different content in their libraries.Both computers use iTunes to manage that computer's music, movies, etc. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |